P11

1. One battery bar flashes white: low battery. Please charge it.
2. Red icons: troubleshoot accordingly.

Eco: 10KPA, 60mins
Auto: 20KPA, 16-34mins
Max: 25KPA, 12-14mins

It’s designed so, not malfunctioning.

Reinstall the battery and charge it fully.

1. Clean filter assembly and the dust container, then correctly install them.
2. Replace the HEPA filter.

1. Clean the dust container and filter assembly.
2. Remove the roller brush and detangle it. Clean the bearings on both sides of the brush head.
3. Power off for 30 minutes and restart the vacuum.

1. Use the original adaptor, and check if the voltage is 34.2V.
2. Charge the battery directly or use the wall-mounted charger.

Remove the metal extension tube and attach the electric broom head directly to the engine. If it functions, then the metal extension tube needs replacement. please reach customer service.

Replace the dust container.

Remove the roller brush and detangle it. Clean the bearings on both sides of the brush head.

Insert the adaptor in place.

Clean the HEPA filter and dust container. If it happens after fully charged, then it’s normal.

Keep the springs, and reach customer service for joint buttons.

Replace the brush head.

Reinstall the battery. If in vain, please reach customer service.